|
Model 1140
Micro-Separometer
"Six Pack"
Test Expendables
A box containing 6 Test Kits, commonly known as a
"Six Pack" are shown above. Expendables for a single test are
vacuum packed in each Test Kit. A container of distilled water is also
included in each Six Pack.
|
Description of Instrument &
Tests
The Model 1140 Micro-Separometer
is an electro-mechanical instrument used to perform two discrete tests.
ASTM Standard Test Method D 3948 is used to rate
the water separation characteristics and D 4860 detects and numerically
rates free water and particulate contamination.
Water Separation Characteristic
Test Method D 3948 employs the use of a turbidimeter, a
mechanical mixer, and a disposable filter. A portion of the sample, in a
clear glass vial, is used to set the meter to read 100. The sample in the
vial is discarded and the vial is retained.
Another portion of the sample in a plastic syringe is used to create a
water/fuel emulsion using the mixer. The emulsion is passed through the
filter at a programmed rate and a portion is collected in the retained
vial. The vial is replaced in the turbidimeter and the water separation
characteristic of the fuel is rated.
The value obtained is compared to the unprocessed sample that was used to
set the meter to 100. The higher the rating, 100 being the maximum, the
less surfactant present.
Clear & Bright
Test Method D 4860 passes a portion of the sample through a
filter medium, which is collected in a clear glass, vial. The vial is
placed in the turbidimeter and the meter is adjusted to 100. The
processed fuel is discarded and a portion of the unprocessed fuel is
placed in the vial, which is re-inserted in the turbidimeter. Higher
ratings, 100 is maximum, indicate that there is less free water and
particulate present.
|
